气候变化领域集成服务门户(CCPortal): Comparative life cycle assessment of different fabrication processes for perovskite solar mini-modules

CCPortal

DOI	10.1051/epjpv/2024014
	Comparative life cycle assessment of different fabrication processes for perovskite solar mini-modules
	Rossi, Federico; Rotondi, Leonardo; Stefanelli, Maurizio; Sinicropi, Adalgisa; Vesce, Luigi; Parisi, Maria Laura
发表日期	2024
ISSN	2105-0716
起始页码	15
卷号	15
英文摘要	Sustainable energy production is one of the major goals for society to address climate change, with the aim of reducing fossil fuel consumption and greenhouse gases emissions. One of the main alternatives to burning fossil fuels is solar energy conversion; therefore, scientific research has moved towards the development of photovoltaic devices that are able to harvest solar radiation and convert it into electric energy, such as perovskite solar cells (PSCs). Several production processes for PSCs exist, differing in the deposition technique of PSCs layers as well as energy and material consumption. One of the main challenges is then to minimize the environmental impact of PSC manufacturing, which can be assessed through Life Cycle Assessment. The aim of this work is to evaluate and compare the eco-profiles of four different PSC production line at mini-module scale, namely, Spin Coating, Blade Coating, Spin Coating + Press and Blade Coating in Glovebox. Results disfavour the latter manufacturing route, showing that its burden is higher than the alternatives. Differently, the Blade Coating process results to be the one having the lowest environmental impact among the proposed solutions, whereas Spin Coating and Spin Coating + Press lines show almost the similar intermediate result.
英文关键词	Life Cycle Assessment; LCA; perovskite solar cells; blade coating; spin coating; module
语种	英语
WOS研究方向	Physics
WOS类目	Physics, Applied
WOS记录号	WOS:001225451500001
来源期刊	EPJ PHOTOVOLTAICS
文献类型	期刊论文
条目标识符	http://gcip.llas.ac.cn/handle/2XKMVOVA/294430
作者单位	University of Siena; University of Rome Tor Vergata; Consiglio Nazionale delle Ricerche (CNR); Isituto di Chimica dei Composti Organometallici (ICCOM-CNR)
推荐引用方式 GB/T 7714	Rossi, Federico,Rotondi, Leonardo,Stefanelli, Maurizio,et al. Comparative life cycle assessment of different fabrication processes for perovskite solar mini-modules[J],2024,15.
APA	Rossi, Federico,Rotondi, Leonardo,Stefanelli, Maurizio,Sinicropi, Adalgisa,Vesce, Luigi,&Parisi, Maria Laura.(2024).Comparative life cycle assessment of different fabrication processes for perovskite solar mini-modules.EPJ PHOTOVOLTAICS,15.
MLA	Rossi, Federico,et al."Comparative life cycle assessment of different fabrication processes for perovskite solar mini-modules".EPJ PHOTOVOLTAICS 15(2024).