Climate Change Data Portal
DOI | 10.1007/s11069-021-04542-x |
A study of earthquake-induced vibration on laminated composite plates using finite element method | |
Saha P.; Mandal K.K. | |
发表日期 | 2021 |
ISSN | 0921030X |
起始页码 | 2251 |
结束页码 | 2277 |
卷号 | 106期号:3 |
英文摘要 | This study presents the dynamic response of an eight-noded composite plate under earthquake excitation. Koyna earthquake excitation frequency is considered for the present study. Central displacement and stresses at various positions are studied extensively. Variation in response under different boundary conditions and varying geometric conditions are presented. The ply angle in a lamina and the number of layers in a plate are also varied to observe their effect on displacement and stress. In almost all the cases, 45° lamination shows maximum displacement response, whereas 0°/90° lamination scheme always shows maximum normal stress values. On the other hand, inplane shear gives maximum response whenever a − 45° layer is present. The effect of plan dimension on displacement is also presented here. The displacement response is maximum when the plate becomes square for both cross- and angle-ply laminations. The displacement response with change in total thickness of the plate is presented in this article. The response increases drastically as the plate becomes thinner for angle and cross-ply laminations. The plate becomes unstable as the side to thickness ratio increases beyond 50. The variation of stresses for cross- and angle-ply laminated plates across their layers is reported here with different boundary conditions. A very important observation made through this comparison as a 45° clamped laminated plate should be designed under transverse shear stress, whereas the simply supported plate should be designed under inplane shear stress. © 2021, The Author(s), under exclusive licence to Springer Nature B.V. part of Springer Nature. |
关键词 | Earthquake excitationFinite element methodKoyna earthquakeLaminated composite plateTransverse shear stress |
英文关键词 | composite; displacement; dynamic response; earthquake event; finite element method; shear stress; vibration |
语种 | 英语 |
来源期刊 | Natural Hazards |
文献类型 | 期刊论文 |
条目标识符 | http://gcip.llas.ac.cn/handle/2XKMVOVA/206530 |
作者单位 | Department of Civil Engineering, Heritage Institute of Technology, Kolkata, India; Department of Civil Engineering, Jadavpur University, Kolkata, India |
推荐引用方式 GB/T 7714 | Saha P.,Mandal K.K.. A study of earthquake-induced vibration on laminated composite plates using finite element method[J],2021,106(3). |
APA | Saha P.,&Mandal K.K..(2021).A study of earthquake-induced vibration on laminated composite plates using finite element method.Natural Hazards,106(3). |
MLA | Saha P.,et al."A study of earthquake-induced vibration on laminated composite plates using finite element method".Natural Hazards 106.3(2021). |
条目包含的文件 | 条目无相关文件。 |
个性服务 |
推荐该条目 |
保存到收藏夹 |
导出为Endnote文件 |
谷歌学术 |
谷歌学术中相似的文章 |
[Saha P.]的文章 |
[Mandal K.K.]的文章 |
百度学术 |
百度学术中相似的文章 |
[Saha P.]的文章 |
[Mandal K.K.]的文章 |
必应学术 |
必应学术中相似的文章 |
[Saha P.]的文章 |
[Mandal K.K.]的文章 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。