气候变化领域集成服务门户(CCPortal): Printed recyclable and self-poled polymer piezoelectric generators through single-walled carbon nanotube templating

CCPortal

DOI	10.1039/c9ee03059j
	Printed recyclable and self-poled polymer piezoelectric generators through single-walled carbon nanotube templating
	Shepelin N.A.; Sherrell P.C.; Goudeli E.; Skountzos E.N.; Lussini V.C.; Dicinoski G.W.; Shapter J.G.; Ellis A.V.
发表日期	2020
ISSN	1754-5692
起始页码	868
结束页码	883
卷号	13 期号:3
英文摘要	With an increasing global energy demand, along with a rising uptake of portable electronic devices, it is of great importance to investigate the viability of alternative energy harvesting technologies. Flexible piezoelectric generators (PEGs) are able to convert mechanical energy to electricity, making them an ideal candidate to decrease reliance on conventional energy sources and to power flexible, portable and implantable electronics. In this study, we show a low-energy production pathway for transparent PEGs based on poly(vinylidene fluoride-co-trifluoroethylene) (PVDF-TrFE) via shear-induced alignment of its dipoles through extrusion printing, complemented by spatial dipolar templating onto single-walled carbon nanotubes (SWCNTs) at low concentrations (<0.05 wt%). The resulting composite PEGs show up to a 500% enhancement in the piezoelectric charge coefficient d33 relative to extrusion printed pristine PVDF-TrFE, with similar enhancements in energy harvesting, exhibiting a power density of up to 20 μW cm-3 at 0.02 wt% SWCNTs. The extrusion printed composite PEGs show recyclability using only a green solvent (acetone) and are found to exhibit piezoelectric energy harvesting with a power density of up to 71 μW cm-3 upon reprinting, overcoming two of the most significant hurdles towards commercial production of flexible PEGs. © 2020 The Royal Society of Chemistry.
语种	英语
scopus关键词	Acetone; Energy harvesting; Extrusion; Flexible electronics; Fluorine compounds; Nanotubes; Piezoelectric devices; Piezoelectricity; Conventional energy sources; Implantable electronics; Piezoelectric charge coefficient; Piezoelectric energy harvesting; Piezoelectric generators; Portable electronic devices; Shear-induced alignment; Single-walled carbon nanotube (SWCNTs); Single-walled carbon nanotubes (SWCN); activated carbon; alternative energy; carbon nanotube; piezoelectricity; polymer; recycling
来源期刊	Energy and Environmental Science
文献类型	期刊论文
条目标识符	http://gcip.llas.ac.cn/handle/2XKMVOVA/162754
作者单位	Department of Chemical Engineering, University of Melbourne, Parkville, VIC 3010, Australia; Department of Chemical Engineering, University of Patras, Greece; FORTH/ICE-HT, Patras, 26504, Greece; Note Issue Department, Reserve Bank of Australia, Craigieburn, VIC 3064, Australia; Australian Institute for Bioengineering and Nanotechnology, University of Queensland, Brisbane, QLD 4072, Australia
推荐引用方式 GB/T 7714	Shepelin N.A.,Sherrell P.C.,Goudeli E.,et al. Printed recyclable and self-poled polymer piezoelectric generators through single-walled carbon nanotube templating[J],2020,13(3).
APA	Shepelin N.A..,Sherrell P.C..,Goudeli E..,Skountzos E.N..,Lussini V.C..,...&Ellis A.V..(2020).Printed recyclable and self-poled polymer piezoelectric generators through single-walled carbon nanotube templating.Energy and Environmental Science,13(3).
MLA	Shepelin N.A.,et al."Printed recyclable and self-poled polymer piezoelectric generators through single-walled carbon nanotube templating".Energy and Environmental Science 13.3(2020).